Product ID:1669070 IBM REPRO CHEM ELECTROPHOTOGRAPHIC TONER 825
MSDS Date:01/20/1986
FSC:6850
NIIN:00F040771
MSDS Number: BXMJK

IBM CORP (INTERNATIONAL BUSINESS MACHINES CORP)

OLD ORCHARD ROAD
ARMONK, NY 10504-1709
US

Emergency Phone: 914-765-1900

Info Phone: 800-426-4333

Cage: GO081

IBM CORPORATION

ARMONK, NY 10504-1709 US

Telephone: 800-426-4333/FAX 214-280-3903

Cage: 30874

COLUMBIA CARBON, CARBON BLACK, LAMPBLACK, BLACK PEARLS

CAS: 1333-86-4

RTECS: FF5800000

Fraction By Weight: 10%

ACRYLIC RESIN

POLYAMIDE RESIN

STYRENE, ALLY ALCOHOL COPOLYMER

MODIFIED MALEIC RESIN ESTER

SILICON DIOXIDE, CELITE 322

CAS: 112945-52-5

RTECS: VV7310000

Fraction By Weight: 1%

OSHA PEL 80 MG/CUM

ACGIH TLV: 0.2 MG/CUM

Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:IN RARE INDIVIDUALS, RASH MAY OCCUR.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IN RARE INDIVIDUALS, RASH MAY OCCUR.

First Aid:EYES: FLUSH COPIOUSLY W/WATER FOR 15 MINS. SKIN: WASH W/SOAP
& WATER. INHALATION: REMOVE TO FRESH AIR. OBTAIN MEDICAL ATTENTION
IN ALL CASES.

Flash Point:914F
Lower Limits:0.2
Extinguishing Media:WATER, CO2, FOAM, DRY CHEMICAL
Fire Fighting Procedures:WEAR NIOSH APPROVED SCBA.
Unusual Fire/Explosion Hazard:TONER DUST IN HIGH CONCENTRATIONS CAN
FORM AN EXPLOSIVE MIXTURE IN AIR WHICH, IF IGNITED COULD RESULT IN
DUST EXPLOSION.

Spill Release Procedures:MINIMIZE GENERATION OF DUST DURING CLEAN-UP.
USE OF A VACUUM CLEANER IS PREFERABLE TO A BROOM. COLLECT MIXTURE &
PLACE IN A CLOSED CONTAINER FOR PROPER DISPOSAL.

Handling and Storage Precautions:AVOID EXCESSIVE HEAT.
Other Precautions:KEEP OUT OF REACH OF CHILDREN.

Respiratory Protection:FOR EMERGENCY USE WEAR NIOSH APPROVED SELF
CONTAINED BREATHING APPARATUS.
Ventilation:NONE REQUIRED
Protective Gloves:NONE REQUIRED
Eye Protection:NONE REQUIRED
Supplemental Safety and Health

Melt/Freeze Pt:M.P/F.P Text:150.8F
Spec Gravity:0.9
Solubility in Water:0
Appearance and Odor:BLACK POWDERY POLYMERIC MATERIAL W/NO ODOR

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:EXCESSIVE HEAT
Hazardous Decomposition Products:CO, CARBON, CO2, NITROGEN OXIDES.

Waste Disposal Methods:SMALL QUANTITIES SHOULD BE DISPOSED OF
IAW/FEDERAL, STATE & LOCAL REGULATIONS. LARGER QUANTITIES,
DESTRUCTION BY APPROVED INCINERTION IS RECOMMENDED.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.